Installation and Getting Started Guide for 720wl/740wl/760wl 2004-03

Network Setup
Step 11. Return to the System Component page (Figure 3-6), and click the IP address link for the Access
Control Server in the top row under System Components column. (If you are configuring an
Integrated Access Manager, the Access Controller portion will be listed below the Access Control
Server).
The Edit Access Control Server page appears (Figure 3-8). The Edit Integrated Access Manager
page looks similar, but does not include the Redundancy area, as an Integrated Access Manager
cannot function as a redundant peer.
Figure 3-8. Edit Access Control Server page
Step 12. To give the Access Control Server a descriptive name, replace the IP address in the Name field
with the name you want to use.
Step 13. In the Shared Secret field, type the shared secret that Access Controllers will use to validate
themselves to this Access Control Server.
Step 14. Retype the shared secret in the Confirm Shared Secret field.
3-12 HP ProCurve Secure Access 700wl Series Installation and Getting Started Guide