760wl 2004-03

Basic Configuration

From the Start menu, click Run… then enter the command ipconfig /renew

The PC should receive an IP address in the 42.x.x.x range.

Step 3. Start your web browser and go to any web site. After a moment the web browser will display the

HP ProCurve 700wl Series Logon page (Figure 4-1).

Note: The 700wl Series system comes with a self-signed SSL certificate. As a result, the client

browser may display a security alert warning that the certificate is not from a trusted source.

Click Yes to proceed.

Figure 4-1. The HP ProCurve 700wl Series user logon page

Step 4.

Enter “demouser” and “password” (or the username and password you created) in the Username

and Password fields and click

Logon User.

At this point, the web page you requested should appear, and you should be able to access the

network normally.

To prepare for logging on again using the PPTP connection interface, log the client off the 700wl Series

system:

Step 5. Set your web browser to the URL http://1.1.1.1. The HP ProCurve Logon window appears,

showing the user as logged on, and displaying a

Logoff button at the top right of the window.

Step 6. Click the Logoff button to log the client off the system.

4-4 HP ProCurve Secure Access 700wl Series Installation and Getting Started Guide