Installation and Getting Started Guide for 720wl/740wl/760wl 2004-03

P
PPG
GE
E
EF
FFRQQ
Basic Configuration
Configuring Access Policies for Encryption
The next step is to configure the appropriate Access Policies to allow the use of encryption. You must
allow encryption for the “Unauthenticated” Access Policy so that an unknown client using encryption
can connect to the 700wl Series system, and you must enable encryption for the relevant Access Policy
that will take effect once the client has been successfully authenticated—in this case, the “Authenticated”
Access Policy.
RQStep 1. From the Navigation toolbar, click the PG
GE
FRQ button ( ) to go to the Rights Manager.
R
Step 2. Click the Access Policy tab to go to the Access Policies page, as shown in Figure 4-3.
Figure 4-3. Access Policies page
Step 3.
Click on the name Unauthenticated in the list of Access Policies to bring up the Edit Access Policy
page for the Authenticated Access Policy. See
Figure 4-4.
4-6 HP ProCurve Secure Access 700wl Series Installation and Getting Started Guide