760wl 2004-03

Basic Configuration

Figure 4-4. Edit Unauthenticated Access Policy page

Step 4.

Select “Allowed, but not required” from the drop down menu for Encryption.

Step 5. Under Encryption Protocols, put a check mark in the PPTP checkbox.

Leave the other settings as they are.

Step 6. Click Save to save your changes to the “Unauthenticated” Access Policy.

Step 7. Return to the Access Policies page, select the “Authenticated” Access Policy (at the top of the

Access Policies list) and make the same changes (Steps 4 through 7).

Now users will be able to log on either using PPTP or without using encryption. In order to use PPTP, the

client must be configured to use PPTP, as described in the following section.

HP ProCurve Secure Access 700wl Series Installation and Getting Started Guide 4-7