760wl 2004-03

Basic Configuration

Figure 4-12. Configuring a RADIUS Authentication Service

Step 7.

Type the required information into the appropriate fields.

• Enter a name for this authentication service in the

Name field.

• Enter the

Server and Port information for your RADIUS server.

• Enter the

Secret that matches the secret configured on your RADIUS server, and enter it a

second time as a confirmation.

• Leave the Group Identity Field blank. This field is used to specify the name of a RADIUS

attribute that contains group information used to assign the authenticated user to an Identity

Profile.

If you elect to use this field, you must also create an Identity Profile to match the group

name that will be returned, and then add a row to the Rights Assignment Table to associate

an Access Policy with that Identity Profile.

• You can leave the default attribute name for the

Re-authentication Field. This field specifies the

name of a RADIUS attribute that specifies the duration (in seconds) after which the client is

forced to reauthenticate.

• Enter the authentication time-out period (in seconds) in the

Timeout field, or leave the default.

Step 8. Click Save.

The Authentication Services page will reappear.

Step 9. Click the Authentication Policies link in the left panel of the page.

The Authentication Policies page will appear.

Step 10. Click the System Authentication Policy name in the table of Authentication Policies.

HP ProCurve Secure Access 700wl Series Installation and Getting Started Guide 4-13