Installation and Getting Started Guide for 720wl/740wl/760wl 2004-03

Basic Configuration
Step 11. The Edit Authentication Policy page appears (see Figure 4-13).
The newly added authentication service appears at the bottom of the list of available
Authentication Services for this Authentication Policy.
Figure 4-13. Editing the System Authentication Policy
Step 12. Use the row up/down buttons to move the newly added RADIUS authentication service ahead of
the Built-in service, and put a check next to this service. (Leave the Built-in service checked as
well.)
Step 13. Click Save.
The new RADIUS authentication service will now be the initial service used to authenticate user
who are being authenticated by the System Authentication Policy. The System Authentication
Policy is used by the default Connection Profile “Any.”
Note: After you complete this step you will still be able to log in using the —demouser“ username,
because the built-in database will still be searched if the user was not authenticated by the RADIUS
server.
4-14 HP ProCurve Secure Access 700wl Series Installation and Getting Started Guide