760wl 2004-03

LCD DISPLAY DESCRIPTION

This appendix describes the LCD display on the Access Controller 720wl, Access Control Server 740wl,

and Integrated Access Manager 760wl. The display can be used to view the system’s network parameters,

and to power down the system. This appendix contains the following sections:

Display Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Powering On and System Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Default Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Software Download and Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4

Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

System Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

Display Description

The LCD display is located in the middle of the front panel of 700wl Series Products. It is a 16 character

by two line display, with two buttons located to the right of the display (Figure B-1).

Figure B-1. LCD Display

SCROLL

SELECT

The top button is labeled SCROLL. Pressing the SCROLL button cycles through the various displays. The

bottom button is labeled SELECT. Pressing the SELECT button causes whatever action is currently on the

display to be taken.

Note: An unusual voltage surge including static discharge can cause the LCD on the front of the unit

to become incorrect and unresponsive. To correct this situation, the unit must be restarted (power

cycled).

B-1