Installation and Getting Started Guide for 720wl/740wl/760wl 2004-03

Powering On and System Boot
At power-on, the display remains blank until the system has initialized itself and displays System Booting
(Figure B-2).
Figure B-2. System Booting
When the booting is finished, the System Booted display appears (Figure B-3).
Figure B-3. System Booted
SCROLL
SELECT
The system then goes to the default display within a few seconds.
Default Display
Once the system has finished booting, the LCD will alternate between the Hostname/IP Address Display
(
Figure B-4), and the Date Time/Version Display (Figure B-5).
Figure B-4. Hostname/IP Address Display
The Hostname/IP Address display shows the hostname (if set, and not fully-qualified) and IP Address of
the unit.
SCROLL
SELECT
SCROLL
SELECT
B-2 HP ProCurve Secure Access 700wl Series Installation and Getting Started Guide