760wl 2004-03

CABLE AND CONNECTOR SPECIFICATIONS

This appendix describes the Serial Connector and the Standard Ethernet cables for use with non-powered

devices. This appendix contains the following sections:

Serial Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1

10/100 Downlink Ethernet Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2

Option Card Ports and Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2

Serial Connector

Table D-1 shows the pin assignments for the serial connector, and Figure D-1 shows the pin configuration.

If you are connecting a Console Device such as a laptop, you must use a serial crossover cable (null

modem cable).

Table D-1. Pin assignments for serial connector

Pin Assignment Symbol

1 Data Carrier Detect DCD

2 Receive Data RXD

3 Transmit Data TXD

4 Data Terminal Ready DTR

5 Signal Ground GND

6 Data Set Ready DSR

7 Request to Send RTS

8 Clear to Send CTS

9 Ring Indicator RI

Figure D-1. Serial Port pin configuration

D-1