760wl 2004-03

10/100 Downlink Ethernet Connectors

Table D-2 shows the RJ45 pin numbers and functions for 10/100 Ethernet ports.

Table D-2. Pin numbers and functions for standard Ethernet cables

Number

Standard Ethernet

1 Incoming Data + (RD+)

2 Incoming Data - (RD-)

3 Outgoing Data + (TD+)

4 No Connection (NC)

5 No Connection (NC)

6 Outgoing Data - (TD-)

7 No Connection (NC)

8 No Connection (NC)

Option Card Ports and Cables

Ports

The ports on the HP ProCurve 10/100 Module are compatible with the IEEE 802.3 10Base-T and 802.3u

100Base-TX standards, and accept the 10 Mbps or 100 Mbps cables listed in Table D-3.

» The port on the HP ProCurve 10/100/1000Base-T Module is compatible with the IEEE 802.3 10Base-T,

802.3u 100Base-TX, and 802.3ab 1000Base-T standards, and accept the 10 Mbps, 100 Mbps, or 1000 Mbps

cables listed in

Table D-3. For 1000 Mbps operation, Category 5E shielded twisted pair cable is

recommended.

» The port on the HP ProCurve Gigabit SX Module transmits at 850 nanometer wavelength, and is

compatible with the IEEE 8021.3z Gigabit-SX standard. It accepts the multi-mode fiber-optic cables

listed in

Table D-3.

» The port on the HP ProCurve Gigabit LX Module transmits at 1310 nanometer wavelength, and is

compatible with the IEEE 8021.3z Gigabit-LX standard. It accepts the single-mode or multi-mode fiber-

optic cables listed in

Table D-3.

D-2 HP ProCurve Secure Access 700wl Series Installation and Getting Started Guide