Quick Start Guide A7000 dl 1xSerial Module (J8458A) 2005-12
61195866E1-13B, December 2005 www.procurve.com Copyright 2005 Hewlett-Packard Development Company, LP
Quick Start Guide 5991-3752
ProCurve Secure Router dl 1xSerial Module
J8458A
SPECIFICATIONS
Operating Mode Frame Relay/Multilink Frame Relay, PPP/Multilink PPP,
HDLC
Serial Interface DTE only, no internal clock provided
Clocking up to 10 Mbps
Supported Standards: ISO 4903 (X.21), CCITT V.35
Synchronous (V.35)
Provides V.35 or X.21 (V.11) electrical interface
Connector: 26-Pin Smart Serial (DTE); additional adapter
cables are available for purchase to provide the V.35 DTE
(J8757A) and X.21 DTE (J8755A) interfaces
Compliance FCC Part 15 Class A, EN 55022 Class A, EN 55024,
EN 61000-3-2, EN 61000-3-3
ETSI TBR 1, ETSI TBR 2
EN 60950, UL/CUL 60950, AS/NZS 60950, IEC 60950
Physical Dimensions: 6.99 cm (2.75 in) W x 10.80 cm (4.25 in) D
Operating Temperature: 0°C to 50°C (32°F to 122°F)
Relative Humidity: Up to 95 percent, noncondensing at
30°C (86°F)
Non-Operating Temperature: -20°C to 70°C (-4°F to 158°F)
Non-Operating Relative Humidity: Up to 95 percent,
noncondensing at 30°C (86°F)
Altitude: Up to 3.05 km (10,000 ft)
INSTALLATION INSTRUCTIONS
1. Remove the power from the unit.
2. Slide the option module into the option slot until the module is firmly
seated against the chassis.
3. Secure the screws at both edges of the module.
4. Connect the cables to the associated device(s).
5. Complete installation of the base unit.
6. Restore power to the unit.
SERIAL TO V.35 AND X.21 CABLES CONNECTION PINOUT
Serial
Pin
V.35
Pin
X.21
Pin Name
1P2 TD_A
2UN/A ETC_A
3 Y N/A TCLK_A
4V6 RCLK_A
5 R 4 RD_A
6 F N/A DCD_A
7HN/A DTR_A
8C3 RTS_A
9 N/A 10 RTS_B (V.11 only)
10 N/A 12 CTS_B (V.11 only)
11 D 5 CTS_A
12 E N/A DSR_A
13 K N/A TM_A
14 S 9 TD_B
15 W N/A ETC_B
16 AA N/A TCLK_B
17 X 13 RCLK_B
18 T 11 RD_B
19 N/A N/A Unused
20 N/A N/A Unused
21 N/A N/A Unused
22 N/A N/A Unused
23 N/A N/A Unused
24 N/A N/A Unused
25 N/A N/A Unused
26 B 8 Ground
Note
For safety information for the routers and all modules,
please refer to the safety and ESD precautions in the
ProCurve Secure Router Installation Guide included
in your router shipment.