Specifications

3-3
Getting Started With Switch Configuration
Minimal Configuration Through the Out-of-Band Console Connection
Getting Started With Switch
Configuration
4. Use the [Tab] key to select the Manager Password field and enter a manager
password of up to 16 characters.
5.
[Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the
Manual option.
6.
[Tab] to the IP Address field and enter the IP address that is compatible with
your network.
7.
[Tab] to the Subnet Mask field and enter the subnet mask used for your
network.
8. Press [
Enter], then [S] (for Save).
The following fields are displayed in the Setup screen. For more information
on these fields, refer to the Management and Configuration Guide at
www.procurve.com/manuals:
6600-2
4G
5
8
6600-2
4G
Pr oCurve Switch
Switch Setup Parameter Default
System Name blank Optional; up to 25 characters, including spaces
System Contact blank Optional; up to 48 characters, including spaces
Manager Password blank Recommended; up to 16 characters (no blank spaces)
Logon Default CLI The default setting selects the command line interface for console access.
The alternative is the menu interface.
Time Zone 0 (none) Optional; 1440 to -1440. The number of minutes your location is to the West (-)
or East (+) of GMT.