Specifications

9
•1 power supply (J9269A)
− The 6600 series has two power supply bays to support power redundancy.
− The power supplies are hot-swappable and allow for tool-less serviceability.
− The 6600 power supplies leverage the 1200 W ProLiant G6 “common-slot” supply to simplify sparing.
•Rack ears for mounting in a two-post telco rack
− For mounting in a four-post network/server rack, the 6600 rack mount kit (J9469A) that includes telescoping
rails is highly recommended.
•AC power cords
− The system ships with two AC power cords: one is the standard HP line cords using a C13 connector on the
power supply side and a country plug on the source end, while the other is a power distribution unit (PDU)
jumper cord with a C13 connector on the power supply side and a PDU plug on the source end. With either
option, the AC source is: 100 to 120 VAC/200 to 240 VAC; 7.5 A/3.75 A; 50/60 Hz.
Chassis layout
The 6600 switch series are high-density, 1U form factor switches. Figure 2 details the power supply side view
of the 6600 series products.
Internal power supply slots
Fan tray
Figure 2: HP ProCurve 6600 Switch Series (power supply side view)
The 6600 fan tray and power supplies are all hot-swappable, so that the switch does not have to be powered
off to remove these serviceable components.
System elements
HP ProCurve 6600 Switch Power Supply (J9269A)
Two power supplies need to be installed to take advantage of the power supply hot-swappable capabilities.
The power supply slots can accommodate the ProLiant G6 “common-slot” supplies. Currently, the 6600 series
only supports the 1200 W AC supply, although the 6600 series is capable of supporting DC and other
common-slot supplies.
Two AC-to-12-V DC power supplies can be configured as 1+1 redundant supplies. The system is fully powered
with either power supply, and either power supply (but not both) can be removed and replaced while the
system is still racked, and the switch will continue to operate. Each power supply input is C14 with proper
safety ground.
110–120 VAC 200–240 VAC
Current < 7.5 A < 3.75 A
Output power > 548 W (> 45.7 A @ 12 VDC) > 548 W (> 45.7 A @ 12 VDC)
Efficiency (1 supply) < 677 W @ > 81% efficiency at full load < 677 W @ > 81% efficiency at full load
Efficiency (2 supplies) < 677 W @ > 75% efficiency at 50% load < 677 W @ > 75% efficiency at 50% load