Installation and Reference Guide HP AdvanceStack 100Base-THub-12TX, Hub-12TXM, and Switch Modules 1997-06

HP Hub-12TX/Hub-12TXM Installation and Reference Guide
Product Overview 1-7
• BOOTP support for dynamic address assignment
• Flash ROM on board the Hub-12TXM for easily updating the
SNMP agent, using either standard firmware updating
software or HP’s Download Manager program, an agent
downloading Windows program
• Firmware update supported for the Hub-12TXM via out-of-
band Xmodem file transfer through the serial port, or TFTP
file transfer over the network
Easy Installation
Installation Features
• Flexible installation for desktop or rack (standard 19” size)
• Plug-and-play design
• Self-diagnostics
• Automatic ID assignment for auto-configuration
Complete Standards
Conformance
Standards and Architecture Compatibility
• Adapts to universal wide range voltage power
(i.e., 100-240 VAC, 50-60 Hz)
• Conforms to IEEE 802.3u Class I repeater specification
and 100Base-TX standard (i.e., 100 Mbit/s Fast Ethernet)
• Optional Switch Port Modules conform to relevant IEEE
specifications and standards for respective media types
• Supports MIB II, Ethernet Repeater MIB, Ethernet MIB, and
private MIB
• Conforms to Simple Network Management Protocol
(SNMP)