Installation and Reference Guide HP AdvanceStack 100Base-THub-12TX, Hub-12TXM, and Switch Modules 1997-06

HP Hub-12TX/Hub-12TXM Installation and Reference Guide
4-10 Configuring the System
System Configuration for the Hub-12TXM and Stack
With this interface you can define system parameters, manage
and control stacked hubs and associated ports, and monitor
network conditions. Set up a VT-100 console connection to the
hub, and enter a user name and password. The default user
names are “admin” (read/write access) or “guest” (read only
access). No password is configured for the default
configuration. The following menu will be displayed after
logging on.
HP J3233A AdvanceStack 100Base-T Hub-12TXM
M a i n M e n u
------------------------------------------
System Information ...
System Configuration ...
Statistics ...
Download ...
Console Security ...
Connectivity Test ...
Reboot Hub
Exit
System Information.
<Enter> to confirm.
Figure 4.3 Main Configuration Menu
Notes: Input options for the selected item are displayed at the bottom
of the interface screen. For items which require you to choose an
option, follow your input by pressing the [Enter] key. Use <Ctrl+N>
to
scroll through an options list, <Ctrl+Z> to move to an upper level
menu, or <Ctrl+E> to close the configuration program.
To select a configuration item, use the arrow keys to position
the cursor (i.e., the highlighted box), and then press the [Enter]
key. Configuration items followed by dots (...) open up another
menu screen. Menu selections are briefly described in the
following table.