Installation and Reference Guide HP AdvanceStack 100Base-THub-12TX, Hub-12TXM, and Switch Modules 1997-06

HP Hub-12TX/Hub-12TXM Installation and Reference Guide
Configuring the System 4-15
Configuring the SNMP Agent
When using SNMP-based network management software, you
must specify basic parameters that control access to the system.
Use the SNMP Configuration menu to display the following
screen parameters:
HP J3233A AdvanceStack 100Base-T Hub-12TXM
SNMP Configuration
-------------------------
Back to Previous Menu
SNMP Communities ...
IP Trap Receivers ...
IPX Trap Receivers ...
Send Authentication Fail Trap : YES
Back to previous menu.
<Enter> to confirm, <Ctrl+Z> to back to Main Menu
Figure 4.7 SNMP Configuration Menu
Menu items are briefly described in the following table.
Field Description
SNMP Communities The community strings authorized for trap management access. All community strings
used for IP and IPX Trap Receivers must be listed in this table.
IP Trap Receivers IP management stations selected to receive trap messages from the system.
IPX Trap Receivers IPX management stations selected to receive trap messages from the system.
Send Authentication Fail Trap Issue a trap message if anyone attempts to access the configuration program without
the proper user name and password.
Table 4.7 SNMP Configuration Menu