xl Modules Installation Guide 2007-12

3
ProCurve Switch xl Modules
Descriptions
ProCurve Wireless
Edge Services xl
Module (J9001A)
5
Note
WARNING
There are no ports on the J9001A.
The module enables the Switch
5300xl to operate with ProCurve
Radio Ports as a centrally-
administered Wireless LAN
system.
For configuration information see
your ProCurve Series 5300xl
Switches Installation and Getting
Started Guide, Chapter 3, “Getting
Started with Switch
Configuration”.
This product contains a Lithium coin-type battery (type CR2032) that requires special handling
at end-of-life. The battery can explode or cause burns if disassembled, charged, or exposed to
water, fire or high temperature. After replacing the battery, properly dispose of used battery.
ProCurve Redundant
Wireless Services xl
Module (J9003A)
5
Note
WARNING
There are no ports on the J9003A.
This module provides failover or
high availability options for the
J9001A module.
For configuration information see
your ProCurve Series 5300xl
Switches Installation and Getting
Started Guide, Chapter 3, “Getting
Started with Switch
Configuration”.
This product contains a Lithium coin-type battery (type CR2032) that requires special handling
at end-of-life. The battery can explode or cause burns if disassembled, charged, or exposed to
water, fire or high temperature. After replacing the battery, properly dispose of used battery.
Module Description
Due to power consumption, no more than two of the follow-
ing modules may be installed in a chassis: J8162A, J9001A,
or J9003A.
Due to power consumption, no more than two of the follow-
ing modules may be installed in a chassis: J8162A, J9001A,
or J9003A.