Release Notes G.07. 53

Software Fixes

Release G.05.06.

 Web-Browser Interface (PR_4904) — When a transceiver is removed from the switch, its

configuration is not cleared on the Status->port status screen of the web UI. The transceiver

type will still show until a new transceiver is inserted.

 Web-Browser Interface (PR_4996) — When using a ProCurve Switch 4108 as a

commander switch in the stack, a ProCurve Switch 2424M is not shown in the device view

of the stack closeup in the web UI. The message “Device view, HP2424M, not supported by

firmware of commander” is present instead of the device view.

 Web-Browser Interface (PR_5055) — Missing firmware/ROM information in Web UI.

 Web-Browser Interface (PR_5158) — When clicking on the Web UI System Info “Apply

Changes” button, a character appears under the “VLAN Configuration” tab.

Release G.05.06.

 Never released.

 Crash (PR_5712) — The switch may crash with a message similar to: TLB Miss: Virtual

Addr=0x00000000 IP=0x8002432c Task='tSmeDebug'

 Crash (PR_5745) — The switch may crash with a message similar to: Divide by Zero Error:

IP=0x801400c0 Task='sal_dpc_hi' Task ID=0x80616690 fp:0x00000000 sp:0x80616600

ra:0x800140060 sr:0x1000af01

 Module (PR_5270) — Modules intermittently fail to boot during switch boot up.

Release G.05.05

 Never released.

 ARP (PR_4880) — Changing the IP address of an interface does not flush the ARP entries

of the original IP address.

 CLI/Timezone (PR_4992) — The timezone changes made for PR_4524 are not transparent

to the end-user. On download of configuration, and during initialization, check for a transition

from code G.04.XX to G.05.XX and adjust configured timezone.

 Configuration (PR_5025) — If the user enables portfast (that is, “spanning-tree 1-24 mode

fast”) the switch can't read the configuration during reload and stops the reload process.

 Crash (PR_4892) — The switch may crash with a message similar to: -> Asserts in rv.cc

line 632

 Crash (PR_5345) — The switch may crash with a message similar to: -> Assertion failed:0,

file drvmem.c, line 167