Release Notes G.07. 53

Software Fixes

Release G.05.05

 Crash (PR_5708) — The switch may crash with a message similar to: -> Unalligned Access:

Virtual Addr=0x847e6929 IP=0x800270bc Task='tMsgCount' Task ID=0x804bf800

fp:0x804bf788 sp:0x804bf788 ra:0x800270b4 sr:0x1000af01

 Crash (PR_5714) — The switch may crash with a message similar to: -> Bus error: HW

Addr=0x00000000 IP=0x002f6148 Task='mHttpCtrl'

 Crash (PR_5715) — The switch may crash with a message similar to: -> Bus error: HW

Addr=0x00000000 IP=0x001429e0 Task='mChassCtrl' Task ID=0x16d0748

 Crash (PR_5725) — The switch may crash with a message similar to: -> Assertion failed:

nt, file dpc.c, line 169

 Crash/Continuous Reboot (PR_5046) — Downloading a certain configuration will cause

the switch to bus error and reboot repeatedly.

 GVRP (PR_4898) — Upstream GVRP neighbor loses connectivity with downstream

neighbor after topology change.

 GVRP (PR_5076) — GVRP registrations are not occurring appropriately after port blocks/

unblocks.

 GVRP (PR_5085) — Switch stops advertising tagged and untagged VLANs on all ports when

GVRP port disable is set for one port.

 Hot-swap (PR_5012) — After hot-swapping a Gig-T module, the switch (incorrectly)

detects a self-test failure with the module.

 Link-up Polling Interval (PR_5000) — A delay of up to 1.7 seconds between plugging in

a cable (linkbeat established) and traffic being forwarded to and from that port may cause

problems with some time sensitive applications. For example, AppleTalk dynamic address

negotiation can be affected, resulting in multiple devices using the same AppleTalk address.

 TACACS (PR_5226) — During TACACS Authentication the TACACS Server's IP address

is shown on the switch's 'splash screen'. [Fix is to not display the TACACS Server's IP

address.]

 TCP (PR_5227) — TCP port 1506 is always open. [Fix is to close TCP port 1506.]

 TFTP/Config File (PR_5032) — When a configuration file is copied from a TFTP server

onto the switch, it removes “no ip untagged 2” from the VLAN configuration.

 Web-Browser Interface (PR_4702) — When configuring a static learn mode for port

security, the message “error in pdu” is displayed if the port does not have LACP disabled.

 Web-Browser Interface (PR_4976) — Mis-spelled word on the product registration

screen of the WEB UI. The phrase “...does not appears above...” is now “...does not appear

above...”