Release Notes G.07. 53

Software Fixes

Release G.05.04 11/4/02

 Web-Browser Interface (PR_5052, 5140) — The CLI does not disable the web-browser

interface.

 Web-Browser Interface (PR_5199) — Having a ProCurve switch 4100GL series as a

commander, and a ProCurve switch 4000m as a member of the stack, the stack commander

was not checking security when doing passthrough.

Release G.05.04 11/4/02

 This build is identical to G.05.03, but was intended to be a general release build, and so was

archived and labeled.

 Crash (PR_4621) — The switch may crash with a message similar to:

-> NMI occurred: IP=0x00317d9c MSR:0x0000b000 LR:0x00013b88 Task='eDrvPollRx' Task

ID=0x1708f20 cr: 0x22000080 sp:0x01708e60 xer...

Release G.05.03

 Never released.

 Crash (PR_4621) — The switch may crash with a message similar to:

-> NMI occurred: IP=0x00317d9c MSR:0x0000b000 LR:0x00013b88 Task='eDrvPollRx' Task

ID=0x1708f20 cr: 0x22000080 sp:0x01708e60 xer.

Release G.05.02 4/19/02

 (PR_4944) Continuous Module Reset — The J4893A ProCurve Switch GL mini-GBIC

module will go into a continual reset loop when both of the following conditions are met:

1. the module is inserted in slot A; and

2. certain traffic conditions occur on port 6 of the module

 Crash (PR_4874) — The switch may crash with a message similar to:

-> Software exception at alloc_free.c:545 -- in 'eDrvPoll'

 Crash (PR_4901) — The switch may crash with a message similar to:

-> Bus Error: HW Addr=0x0000000 IP=0x002fe640 Task='eTelnetd'

This crash has been associated with security/vulnerability test applications such as Nessus.

 Loop/VTP (PR_4945) — The switch will incorrectly forward VTP packets from third party

devices if that packet is received on a blocked port.

 Web-Browser Interface (PR_3634) — After clearing the intrusion flag in the web-browser

interface, the intruder flags are not removed.