Release Notes G.07. 53

Software Fixes

Release G.04.03

allowed will now fail. To avoid this problem either reconfigure the Gigabit-SX and -LX ports

to Auto on the HP 1600M/2400M/2424M/4000M/8000M switches or other switches, or recon-

figure the Gigabit-SX and -LX ports on the HP Series 4100GL switches to 1000FDx.

Release G.04.03

 Never released.

Release G.04.02 12/21/01

 Corrupted Flash (PR_3932) — An SNMP set, during the OS download operation of

TopTools, while the switch is writing new OS to flash may result in corrupted flash and switch

may boot up in LAN Monitor mode.

Release G.04.01

 Never released.

 Friendly Port Names

 SSH Security (SSHv1)

 RADIUS Security

 Port-Access (802.1x) Security

 QoS Priority

 Rapid Spanning Tree (802.1W)

 Performance enhancements to the message system has resulted in minimizing, or eliminating

the following types of messages from occurring in the event log and boot history:

 ARL-1 problem detected. Please contact HP Support ARL-2 problem detected. Please contact

HP Support

 NOTE: The startup-config file saved under version G.04.01, or later, is NOT backward-

compatible with previous software versions. The user is advised to save a copy of the pre-

04.01 startup-config file BEFORE UPGRADING to G.04.01 or greater, in case there is ever a

need to revert back to pre- 04.01 software. Instructions for saving a copy of the startup-config

file are found in the “Transferring Switch Configurations” section of Appendix A in the

Management and Configuration Guide (included on the Product Documentation CD-ROM

(PDF format)) that shipped with the switch.