Installation and Reference Guide HP AdvanceStack 100Base-THub-12TX, Hub-12TXM, and Switch Modules 1997-06

HP Hub-12TX/Hub-12TXM Installation and Reference Guide
4 Index
System Configuration • 4-12
Making the Connections for • 4-1
System Configuration Options
Direct Connection • 4-2
Local Network Connection • 4-3
Local Network Telnet Connection • 4-2
Network Connection • 4-2
Remote Connection • 4-3
System Information • 4-11
System Operation
Verifying • 2-14
System Statistics
Alignment Errors • 4-29, 4-30, 4-32
Auto Partitions • 4-32
Collisions • 4-29, 4-30, 4-32
CRC Errors • 4-29, 4-30
Data Rate Mismatch • 4-32
FCS Errors • 4-32
Frames • 4-29, 4-30
Frames Too Long • 4-32
Late Events • 4-32
Runts • 4-32
Short Events • 4-32
Symbol Errors • 4-29, 4-30
Total Errors • 4-29, 4-30, 4-32
T
Total Bandwidth • 1-6
Traffic • 5-7
Transmission Mode
Selection • 2-10
Troubleshooting • A-1
Cabling • A-3
Configuration • A-4
Hub Indicators • A-1
Installation • A-2
Power and Cooling • A-2
Twisted-pair Cable
Category 3,4,5 • 2-5, A-3
U
Using the VT-100 Console Interface • 4-7
Utilization • 5-5
V
VT-100 Console Interface
Configuring the Hub-12TXM Site • 4-3
Configuring the Remote Site • 4-4
Remote Configuration Methods • 4-4
Setting Communication Parameters • 4-3
System Configuration Hub-12-TX • 4-7
Using • 4-7