Installation and Reference Guide HP AdvanceStack 100Base-THub-12TX, Hub-12TXM, and Switch Modules 1997-06

HP Hub-12TX/Hub-12TXM Installation and Reference Guide
Contents xvii
Figure 4.19 Backup Links Menu 4-26
Figure 4.20 Statistics Menu 4-27
Figure 4.21 Stack Statistics Window 4-28
Figure 4.22 Hub Statistics: Hub Selection Menu 4-29
Figure 4.23 Hub Statistics Window 4-30
Figure 4.24 Port Statistics: Port Selection Menu 4-31
Figure 4.25 Port Statistics Menu 4-32
Figure 4.26 Exp Slot Port Statistics Menu 4-33
Figure 4.27 Download Menu 4-34
Figure 4.28 TFTP Download Menu 4-35
Figure 4.29 Xmodem Download Menu 4-37
Figure 4.30 Console Security Menu 4-38
Figure 4.31 Connectivity Test Menu 4-39
Figure 4.32 IP Ping Test Menu 4-40
Figure 4.33 IPX Ping Test Menu 4-41
Figure 4.34 Link Test Menu 4-42
Figure 4.35 Screen Messages for Rebooting the Hub 4-43
Figure 5.1 Front Panel of the Hub-12TXM 5-1
Figure 5.2 Indicators 5-2
Figure 5.3 HP J3247A for 100Base-TX 5-3
Figure 5.4 HP J3248A for 100Base-FX 5-3
Figure 5.5 Rear Panel 5-12
Figure B.1 RJ-45 Connector (on the Hub Side) B-1
Figure B.2 DB9 Serial Port (on the Hub Side) B-2
List of Tables
Table 2.1 Maximum Fiber Lengths for Basic Topology
Models 2-8
Table 2.2 Calculating the Power Budget for Fiber Optic
Devices 2-9
Table 2.3 Power Budget for Common Fiber Optic Devices 2-9
Table 2.4 Checking Key LED Indicators 2-14
Table 2.5 Maximum Cable Length 2-15
Table 4.1 Configuration Options in Main Menu (Hub-12TX
only) 4-8
Table 4.2 Configuration Options for Switch Port Module
(Hub-12TX only) 4-9
Table 4.3 Main Configuration Menu 4-11