Installation and Reference Guide HP AdvanceStack 100Base-THub-12TX, Hub-12TXM, and Switch Modules 1997-06

HP Hub-12TX/Hub-12TXM Installation and Reference Guide
Configuring the System 4-11
Field Description
System Information Identifies the system.
System Configuration Network parameters, SNMP agent, hub, port and backup links configuration menus
Statistics Displays for network, hub and port performance information
Download Download new firmware by TFTP (network) or Xmodem (Console Port)
Console Security Defines password for administrator and guest. Also sets the time the system will wait
without receiving any keyboard input before logging you off the VT-100 console
interface.
Connectivity Test Performs connection tests between the agent and another designated device on the
network.
Reboot Hub Reboots the system.
Exit Exits the configuration interface and returns to operating system.
Table 4.3 Main Configuration Menu
Displaying System Information
Choose System Information from the Main menu to display and
modify general information about the Hub-12TXM stack, or for
quick system identification. View a description of the system
similar to that displayed in the following example:
HP J3233A AdvanceStack 100Base-T Hub-12TXM
System Information
------------------------
Back to Previous Menu
System Description : HP J3233A AdvanceStack 100Base-T Hub-12TXM
System Object ID : 1.3.6.1.4.1.11.2.14.13.1
System Up Time : 26333 (0 day 0 hr 4 min 23 sec)
System Name : R&D Stack
Contact : Chris
Location : 2nd floor
Back to previous panel.
<Enter> to confirm, <Ctrl+Z> to back to Main Menu
Figure 4.4 System Information Menu