Installation and Reference Guide HP AdvanceStack 100Base-THub-12TX, Hub-12TXM, and Switch Modules 1997-06

HP Hub-12TX/Hub-12TXM Installation and Reference Guide
4-16 Configuring the System
Configuring SNMP Communities
Access to the hub’s on-board management agent via network
management software is controlled with community strings.
Use the SNMP Communities command to edit community
strings and access rights as shown below:
HP J3233A AdvanceStack 100Base-T Hub-12TXM
SNMP Communities
-------------------------
Back to Previous Menu
Community Name Access Status
1. public READ/WRITE ENABLED
2. READ ONLY DISABLED
3. READ ONLY DISABLED
4. READ ONLY DISABLED
5. READ ONLY DISABLED
Back to previous menu.
<Enter> to confirm, <Ctrl+Z> to back to Main Menu
Figure 4.8 SNMP Communities Menu
Menu items are briefly described in the following table.
Field Description
Community Name A community entry authorized for management access.
Access Management access is restricted to Read Only or Read/Write.
Status The current entry can be ENABLED or DISABLED.
Table 4.8 SNMP Communities Menu