Switch 7700 Command reference Guide, v2.0

134 CHAPTER 5: USING ROUTING PROTOCOL COMMANDS
Using the undo default interval command, you can restore the default value
of 1 second.
OSPF requires a default interval when redistributing a route found by other routing
protocols.
Example
To specify a default interval of 10 seconds for OSPF to import external routes,
enter the following:
[SW7700-ospf]default interval 10
default limit Syntax
default limit routes
undo default limit
View
OSPF view
Parameter
routes Enter a limit on the number of imported external routes, in the range 200
to 2147483647. By default, the limit is 1000.
Description
Using the default limit command, you can configure maximum number of
allowed imported routes.
Using the undo default limit command, you can restore the default value.
OSPF requires a default limit when redistributing a route found by other routing
protocols.
Related commands: default interval.
Example
To specify a limit of 200 imported external routes, enter the following:
[SW7700-ospf]default limit 200
default tag Syntax
default tag tag
undo default tag
View
OSPF view
Parameter
tag Enter a tag number, in the range 0 to 4294967295.