Switch 7700 Command reference Guide, v2.0

138 CHAPTER 5: USING ROUTING PROTOCOL COMMANDS
View
All views
Parameter
ip_address Enter an IP address.
ip_mask Enter an IP subnet mask.
Description
Using the display ospf asbr-summary command, you can view the summary
information of an OSPF imported route, or all OSPF imported routes.
If you do not specify an IP address and subnet mask, the summary information of
all OSPF imported routes is displayed.
Related command: asbr-summary.
Example
To display the summary information of all OSPF imported routes, enter the
following:
<SW7700>display ospf asbr-summary
The information displays in the following format:
Total summary address count: 2
Summary Address
net : 168.10.0.0
mask : 255.254.0.0
tag : 1
status : Advertise
The Count of Route is 0
Summary Address
net : 1.1.0.0
mask : 255.255.0.0
tag : 100
status : DoNotAdvertise
The Count of Route is 0
display ospf brief Syntax
display ospf brief
View
All views
Parameter
None
Description
Using the display ospf brief command, you can view OSPF summary
information.