Switch 7700 Command reference Guide, v2.0

OSPF Configuration Commands 139
Example
To display OSPF summary information, enter the following:
<SW7700>display ospf brief
The information displays in the following format:
RouterID: 10.110.95.189 Border Router: AS
spf-schedule-interval: 5
Routing preference: Inter/Intra: 10 External: 150
Default ASE parameters: Metric: 1 Tag: 0.0.0.1 Type: 2
SPF computation count: 16
Area Count: 1 Nssa Area Count: 0
Area 0.0.0.0:
Authtype: none Flags: <>
SPF scheduled: <>
Interface: 201.1.1.4 (Vlan-interface1)
Cost: 1 State: DR Type: Broadcast
Priority: 1
Designated Router: 201.1.1.4
Backup Designated Router: 201.1.1.3
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
display ospf cumulative Syntax
display ospf cumulative
View
All views
Parameter
None
Description
Using the display ospf cumulative command, you can view the OSPF
cumulative information.
Example
To display the OSPF cumulative information, enter the following:
<SW7700>display ospf cumulative
The information displays in the following format:
IO Statistics
Type Input Output
Hello 225 437
DB Description 78 86
Link-State Req 18 18
Link-State Update 48 53
Link-State Ack 25 21
ASE: 1 Checksum Sum: FCAF
LSAs originated by this router
Router: 50 SumNet: 40SumASB: 2
LSAs Originated: 92 LSAs Received: 33