Switch 7700 Command reference Guide, v2.0

144 CHAPTER 5: USING ROUTING PROTOCOL COMMANDS
View
All views
Parameter
None
Description
Using the display ospf request-queue command, you can view information
about the OSPF request-queue.
Example
To display the information on the OSPF request-queue, enter the following:
<SW7700>display ospf request-queue
The information displays in the following format:
The Router's Neighbors is
RouterID: 1.1.1.1 Address: 1.1.1.1
Interface: 1.1.1.3 Area: 0.0.0.0
LSID:1.1.1.3 AdvRouter:1.1.1.3 Sequence:80000017 Age:35
display ospf
retrans-queue
Syntax
display ospf retrans-queue
View
All views
Parameter
None
Description
Using the display ospf retrans-queue command, you can view information on
the OSPF retransmission queue.
Example
To display information on the OSPF retransmission queue, enter the following:
<SW7700>display ospf retrans-queue
The information displays in the following format:
The Router's Neighbors is
RouterID: 1.1.1.3 Address: 1.1.1.3
Interface: 1.1.1.1 Area: 0.0.0.0
Retrans list:
Type: Net LSID:1.1.1.1 AdvRouter:1.1.1.1
display ospf routing Syntax
display ospf routing