Switch 7700 Command reference Guide, v2.0

OSPF Configuration Commands 145
View
All views
Parameter
None
Description
Using the display ospf routing command, you can view the information about
the OSPF routing table.
Example
To view information on the OSPF routing table, enter the following:
<SW7700>display ospf routing
The information displays in the following format:
Routing for Network
Destination Cost Type NextHop AdvRouter Area
10.110.0.0 10 Stub 10.110.10.1 0.0.0.1 1
10.10.0.0 10 Stub 10.10.0.1 0.0.0.1 0
Routing for ASEs
Destination Cost Type Tag NextHop AdvRotue
2.2.0.0 1 2 1 10.10.0.1 0.0.0.2
Total Nets: 2
Intra Area: 2 Inter Area: 0 ASE: 1 NSSA: 0
display ospf vlink Syntax
display ospf vlink
View
All views
Parameter
None
Description
Using the display ospf vlink command, you can view the information about
OSPF virtual links.
Example
To view OSPF virtual links information, enter the following:
<SW7700>display ospf vlink
The information displays in the following format:
Virtual-link Neighbor-id -> 10.10.10.2, State: Full
Cost: 10 State: P To P Type: Virtual Interface: 10.10.10.1
(Vlan-interface10)
Transit Area: 0.0.0.1
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1