Switch 7700 Command reference Guide, v2.0

Integrated IS-IS Configuration Commands 165
display isis mesh-group Syntax
display isis mesh-group
View
All views
Parameter
None
Description
Use the display isis mesh-group command to view the configuration of the
IS-IS mesh group of the current router interface.
Example
Add Interface Vlan-interface 1 and Interface Vlan-interface 2 running IS-IS into
mesh group 100.
[SW7700-Vlan-interface1]isis mesh-group 100
[SW7700]interface Vlan-interface 2
[SW7700-Vlan-interface2]isis mesh-group 100
Display the information of IS-IS mesh-group.
[SW7700-Vlan-interface2]display isis mesh-group
Vlan-interface 1 100
Vlan-interface 2 100
display isis peer Syntax
display isis peer [ verbose ]
View
All views
Parameter
verbose: When this parameter is configured, the area address carried in the Hello
packet from the neighbor will be displayed. Otherwise, only the universal
information will be displayed.
Description
Use the display isis peer command to view IS-IS peer information.
The display isis peer verbose command yields not only all the outputs of the
display isis peer command, but also the area address, Uptime and IP address of the
directly connected interface of the peer.
Example
Output more information, using the verbose parameter.
<SW7700>display isis peer verbose
NET Interface Id State HoldTimeType Pri
0001.0002.0002Vlan-interface1 0001.0002.0008.01Up 23s L1(L12)64
Area Address: 01 02 IP Address: 175.1.19.36 Period: 00:25:30
0001.0002.0002Vlan-interface2002 Up 26s L1 0
Area Address: 01 02 IP Address: 175.1.19.22 Period: 00:00:51