Switch 7700 Command reference Guide, v2.0

166 CHAPTER 5: USING ROUTING PROTOCOL COMMANDS
View IS-IS peer information.
<SW7700>display isis peer
NET Interface Id State HoldTimeType Pri
0001.0002.0002Vlan-interface1 0001.0002.0008.01 Up 26s L1(L12)64
0001.0002.0002 Vlan-interface2 002 Up 29s L1 0
display isis route Syntax
display isis route
View
All views
Parameter
None
Description
Use display isis route command to view IS-IS routing information.
Example
View IS-IS routing information.
<SW7700>display isis route
ISIS Level - 1 Forwarding Table :
Type - D -Direct, C -Connected, I -ISIS, S -Static, O -OSPF
B -BGP, R -RIP
Flags: R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Destination/Mask In.Met Ex.Met NextHop Interface Flags
--------------------------------------------------------------------
D 4.0.0.0/8 10 NULL Direct Vlan-interface2 R/L/-
ISIS Level - 2 Forwarding Table :
Type - D -Direct, C -Connected, I -ISIS, S -Static, O -OSPF
B -BGP, R -RIP
Flags: R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Destination/Mask In.Met Ex.Met NextHop Interface Flags
-------------------------------------------------------------------
D 4.0.0.0/8 10 NULL Direct Vlan-interface2 R/L/-
display isis spf-log Syntax
display isis spf-log
View
All views
Parameter
None
Description
Use the display isis spf-log command to view the SPF calculation log
information of the IS-IS.