Switch 7700 Command reference Guide, v2.0

IP Routing Policy Configuration Commands 233
Example
Display the information of the address prefix list named as p1.
<SW7700>display ip ip-prefix p1
ip-prefix p1
index 10: permit 192.168.10.10/16 greater-equal 17 less-equal 18
display route-policy Syntax
display route-policy [ route_policy_name ]
View
All views
Parameter
route_policy_name: Specifies displayed Route-policy name.
Description
Use the display route-policy command, you can view the configured
Route-policy
Related command: route-policy.
Example
Display the information of Route-policy named as policy1.
<SW7700>display route-policy policy1
Route-policy : policy1
Permit 10 : if-match (prefixlist) p1
apply cost 100
matched : 0 denied : 0
filter-policy export Syntax
filter-policy { acl_number | ip-prefix ip_prefix_name } export [
protocol ]
undo filter-policy { acl_number | ip-prefix ip_prefix_name } export
[ protocol ]
View
Routing protocol view
Parameter
acl_number: Number of the access control list used for matching the destination
address field of the routing information.
ip_prefix_name: Address prefix list used for matching the routing information
destination address field.
protocol: The routing information of which kind of route protocol to be filtered.