Switch 7700 Command reference Guide, v2.0

QoS Configuration Commands List 279
days-of-the-week: Determines in which day(s) of a week in the special time
range a command takes effect. The command takes effect everyday within the
time range, if this parameter is omitted. You can specify this parameter with any
of the following values:
■ Numbers (ranging from 0 to 6);
■ Monday, Tuesday, Wednesday, Thursday, Friday, Saturday or Sunday;
■ working-day, representing 5 working days, from Monday to Friday;
■ off-day, representing Saturday and Sunday;
from start-date: Start date of the special time range, determining effective days
of the time range with the end-date, format as hh:mm MM-DD-YYYY.
to end-date: End date of the special time range, determining effective days of
the time range with the start-date, format as hh:mm MM-DD-YYYY.
If the above two parameters are omitted, there is no limit to the effective date.
Description
■ Use the time-range command to configure a time range.
■ Use the undo time-range command to delete a time range.
If you input the parameter when use the undo time-range command, the system
will delete the corresponding content of the time range according to the
parameter input.
Example
Configure a time range being effective since zero hour on January 1, 2000 and
forever.
[SW7700]time-range test from 0:0 1-1-2000
QoS Configuration
Commands List
This section describes how to use the Quality of Service (QoS) configuration
commands on your Switch 7700.
display mirroring-group Syntax
display mirroring-group [ groupid ]
View
All views
Parameter
groupid: mirroring group number, range from 1 to 20.
Description
Use the display mirroring-group command to view the parameter settings of
port mirror. The displayed information includes the port to be monitored, direction
of the monitored packets, observing port, and so on.
Related command: mirroring-group.