Switch 7700 Command reference Guide, v2.0

QoS Configuration Commands List 281
View
All views
Parameter
interface-name | interface-type interface-num: Specifies a port of the
switch. For more information, refer to the port command manual.
Description
Use the display qos-interface queue-scheduler command to view the queue
scheduling mode and parameters.
Related command: queue-scheduler.
Example
Display the queue scheduling mode and parameters.
<SW7700>display qos-interface queue-scheduler
Queue scheduling mode: strict-priority
display qos-interface all Syntax
display qos-interface [ interface-name | interface-type
interface-num ] all
View
All views
Parameter
interface-name | interface-type interface-num: Specifies a port of the switch. For
more information, refer to the port command manual.
Description
Use the display qos-interface all command to view the QoS setting of all the
ports.
If you do not input the port parameters, the command will display all the QoS
settings on the switch, including rate limit and line
rate etc. If you set the port
parameters, the configuration information about the specified port will be
displayed.
Example
Display the QoS settings of all the ports.
<SW7700>display qos-interface all
Ethernet1/0/2: traffic-limit
Input:
Matches: access-list 1 rule 0 running
Target rate: 4 Mbps
display qos-interface
traffic-bandwidth
Syntax
display qos-interface [ interface-name | interface-type
interface-num ] traffic-bandwidth