Switch 7700 Command reference Guide, v2.0

282 CHAPTER 7: USING QOS/ACL COMMANDS
View
All views
Parameter
interface-name | interface-type interface-num: Specifies a port of the
switch. For more information, refer to the port command manual.
Description
Use the display qos-interface traffic-bandwidth command to view the
settings of bandwidth.
Related command: traffic-bandwidth.
Example
Display the settings of traffic bandwidth assurance.
<SW7700>display qos-interface traffic-bandwidth
display qos-interface
traffic-limit
Syntax
display qos-interface [ interface-name | interface-type
interface-num ] traffic-limit
View
All views
Parameter
interface-name | interface-type interface-num: Specifies a port of the
switch. For more information, refer to the port command manual.
Description
Use the display qos-interface traffic-limit command to view the settings
of rate limit. The information displayed includes the ACL of the traffic to be
limited, the limited average rate and the settings of some related policing action.
Related commands: traffic-limit.
Example
Display the settings of traffic limit.
<SW7700>display qos-interface traffic-limit
Ethernet1/0/1: traffic-limit
Input:
Matches: access-list 1 rule 0 running
Target rate: 10 Mbps
Ethernet1/0/2: traffic-limit
Input:
Matches: access-list 10 rule 0 running
Target rate: 100 Mbps
display qos-interface
traffic-priority
Syntax
display qos-interface [ interface-name | interface-type
interface-num ] traffic-priority