Switch 7700 Command reference Guide, v2.0

Logging in Commands 33
View
User interface view
Parameter
call-in: Enter to enable (or disable) modem call-in.
both: Enter to enable (or disable) modem call-in and call-out.
Description
Using this command, you can configure the call-in and call-out attributes of the
modem.
■ The modem call-in command allows modem call-in only.
■ The modem both command allows both modem call-in and call-out
■ The undo modem call-in command denies modem call-in.
■ The undo modem both command denies both modem call-in and call-out
Example
To allow call-in and call-out of the modem on the AUX (Console) port, enter the
following:
[SW7700-ui-aux0]modem both
modem auto-answer Syntax
modem auto-answer
undo modem auto-answer
View
User interface view
Parameter
None
Description
■ Use the modem auto-answer command to configure the modem to
auto-answer.
■ Use the undo modem auto-answer command to configure the modem to
manual answer
By default, the answer mode is set to manual.
Example
To configure the answer mode of the Modem on the AUX (Console) port as
auto-answer, enter the following:
[SW7700-ui-aux0]modem auto-answer
modem timer answer Syntax
modem timer answer seconds