Switch 7700 Command reference Guide, v2.0

Logging in Commands 35
quit Syntax
quit
View
All views
Parameter
None
Description
Use the quit command to exit from the current view to the next highest view. If
the current view is user view, this command quits the system.
There are three levels of view, which are, from high to low:
■ user view
■ system view
■ menu views, for example VLAN view, Ethernet port view, and so on.
Related commands: return, system-view.
Example
To return to user view from system view, enter the following:
[SW7700]quit
<SW7700>
return Syntax
return
View
System view
Parameter
None
Description
Use the return command to return to user view from any other view.
Ctrl+Z performs the same function as the return command.
To return to the next highest level of view, use quit.
Example
To return to user view from any other view (the example below shows the
command entered from the system view), enter the following.
[SW7700]return
<SW7700>
screen-length Syntax
screen-length screen-length