Switch 7700 Command reference Guide, v2.0

364 CHAPTER 9: USING AAA AND RADIUS COMMANDS
This command displays the information about a specified or all the users. The
output can help you with the user connection diagnosis and troubleshooting.
Related command: cut connection.
Example
Display the relevant information of all the users.
<SW7700>display connection
Total 0 connections matched ,0 listed.
display domain Syntax
display domain [ isp-name ]
View
All views
Parameter
isp-name: Specifies the ISP domain name, with a character string not exceeding
24 characters. The specified ISP domain shall have been created.
Description
Use the display domain command to view the configuration of a specified ISP
domain or display the summary information of all ISP domains.
This command is used to output the configuration of a specified ISP domain or
display the summary information of all ISP domains. If an ISP domain is specified,
the configuration information will be displayed exactly the same, concerning the
content and format, as the displayed information of the
display domain
command. The output information can help with ISP domain diagnosis and
troubleshooting. Note that the accounting scheme to be displayed should have
been created.
Related commands: access-limit, domain, radius scheme, state, display
domain
.
Example
Display the summary information of all ISP domains of the system.
<SW7700>display domain
0 Domain=123 State=Active Accessed=0
1 Domain=3Com163.net State=Block Accessed=0
Default Domain Name: 123 Auto-Append=Yes
Total 2 domain(s) listed.
display local-user Syntax
display local-user [ domain isp-name | idle-cut { enable | disable }
| service-type { telnet | ftp | lan-access } | state { active |
block } | user-name user-name | vlan vlanid ]
View
All views