Switch 7700 Command reference Guide, v2.0

Logging in Commands 41
undo super password level level
View
System view
Parameter
level: Enter a user level in the range 1 to 3. The default is 3. The password you
enter is set for the specified level.
simple: Sets the password to plain text. A plain text password is a sequential
character string of no more than 16 characters, for example, 3Com918.
cipher: Sets the password to cipher text. The password displays as encrypted text
if you use this option.
password: Enter the required password.
Description
■ Use the super password command to set the password that a user must enter
before changing to a higher access level. A user must input the correct
password three times before they can access the required level.
■ Use the undo super password command to cancel the password settings.
The password in plain text is required when performing authentication, regardless
of whether
the configuration is plain text or encrypted text.
Example
To set the password for level 3 to zbr, type the following:.
[SW7700]super password level 3 simple zbr
sysname Syntax
sysname text
undo sysname
View
System view
Parameter
text: Enter the host name of the Switch 7700. The host name must be no more
than 30 characters long. The default is SW7700.
Description
■ Use the sysname command to configure the host name of the Switch 7700.
■ Use the undo sysname command to restore the host name to the default of
SW7700.
Changing the hostname of the Ethernet switch will affect the prompt of
command line interface. For example, if the hostname of the Ethernet switch is
MyHost, the prompt in user view will be <MyHost>.