Switch 7700 Command reference Guide, v2.0

FTP Server Configuration Commands 415
save Syntax
save
View
User view
Parameter
None
Description
Using the save command, you can save the current configuration files to Flash
memory.
After finishing a group of configurations and achieving corresponding functions,
user should remember to get the current configuration files stored in the flash
memory.
Related commands: reset saved-configuration, display
current-configuration
, display saved-configuration.
Example
Get the current configuration files stored in the flash memory.
<SW7700>save
Now writing the running config to flash memory.
Please wait for a while...
save the running config to flash memory successfully
FTP Server
Configuration
Commands
This section describes how to use the File Transfer Protocol (FTP) configuration
commands on your Switch 7700.
display ftp-server Syntax
display ftp-server
View
All views
Parameter
None
Description
Using the display ftp-server command, you can display the parameters of the
current FTP Server. You can Perform this command to verify the configuration after
setting FTP parameters.
Example
Display the configuration of FTP Server parameters.
<SW7700>display ftp-server
Ftp server is running
Max user number 5