Switch 7700 Command reference Guide, v2.0

416 CHAPTER 11: USING SYSTEM MANAGEMENT COMMANDS
User count 0
Timeout(minute) 30
display ftp-user Syntax
display ftp-user
View
All views
Parameter
None
Description
Using the display ftp-user command, you can display the parameters of
current FTP user. You can perform this command to examine the configuration
after setting FTP parameters.
Example
Show the configuration of FTP user parameters.
<SW7700>display ftp-user
% No ftp user
ftp server Syntax
ftp server enable
undo ftp server
View
System view
Parameter
enable: Start FTP Server.
Description
Using the ftp server command, you can start FTP Server and enable FTP user
logon. Using the
undo ftp server command, you can close FTP Server and
disable FTP user logon.
By default, FTP Server is shut down.
Perform this command to easily start or shut down FTP Server, preventing Ethernet
Switch from being attacked by some unknown user.
Example
Shut down FTP Server.
[SW7700]undo ftp server
ftp timeout Syntax
ftp timeout minute
undo ftp timeout