Switch 7700 Command reference Guide, v2.0

436 CHAPTER 11: USING SYSTEM MANAGEMENT COMMANDS
View
User view
Parameter
file-url: File path and file name of Bootrom.
slot-num-list: slot-num-list = [ slot-num1 [ to slot-num2 ] ]&<1-10>, slot
need to be upgraded, the range of slot-num is from 0 to 6. &<1-10> indicates that
parameter in front of this mark can be input up to 10 times.
Description
Using the boot bootrom command, you can upgrade bootrom.
Example
Upgrade bootrom of No. 0 slot.
<SW7700>boot bootrom PLATV100R002B09D002.btm slot 0
display backboard view Syntax
display backboard view
View
All views
Parameter
None
Description
Using the display backboard view command, you can display system backplane
configuration.
Example
Show backboard view.
[SW7700]display backboard view
The backboard view is 0
Current Back Board Configuration is described as following:
|Slot No. |Brd Type |Slot Band Width |Brd Available
| 1 |NONE | 8G |NO
| 2 |NONE | 8G |NO
| 3 |NONE | 8G |NO
| 4 |LS81FT48| 8G |YES
| 5 |NONE | 0G |NO
| 6 |NONE | 0G |NO
display bootloader Syntax
display bootloader
View
All views