Switch 7700 Command reference Guide, v2.0

Device Management Commands 437
Parameter
None
Description
Using the display bootloader command, you can display APP file used next
time.
Example
<SW7700>display bootloader
The app to boot at the next time is: PLATV100R002B09D002.APP
display cpu Syntax
display cpu
View
All views.
Parameter
None
Description
Using the display cpu command, you can display CPU occupancy.
Example
To display CPU occupancy, enter the following:
<SW7700>display cpu
The information displays in the following format:
CPU busy status:
18% in last 5 seconds
19% in last 1 minute
19% in last 5 minutes
display device Syntax
display device [ shelf shelf-no | frame frame-no | slot slot-no ]
View
All views
Table 30 Display information
Field Description
CPU busy status The busy status of the Switch
18% in last 5 seconds The CPU occupancy rate is 18% at last 5 seconds
19% in last 1 minute The CPU occupancy rate is 19% at last 1 minute
19% in last 5 minutes The CPU occupancy rate is 19% at last 5 minutes