Switch 7700 Command reference Guide, v2.0

System Debug Commands 451
SW7700 with 1 MPC8260 Processor
128M bytes SDRAM
16384K bytes Flash Memory
0K bytes NVRAM Memory
Pcb Version: REV.0
BootROM Version: 300
CPLD Version: 001
MOD1: uptime is 1 week, 1 day, 17 hours, 33 minutes.
SW7700 MOD1 with 1 MPC850 Processor
64M bytes SDRAM
0K bytes Flash Memory
0K bytes NVRAM Memory
Pcb Version: REV.1
BootROM Version: 300
CPLD Version: 001
MOD2: uptime is 1 week, 1 day, 17 hours, 33 minutes.
SW7700 MOD2 with 1 MPC850 Processor
64M bytes SDRAM
0K bytes Flash Memory
0K bytes NVRAM Memory
Pcb Version: REV.0
BootROM Version: 300
CPLD Version: 001
System Debug
Commands
This section describes the system debugging options, and the system diagnostics
information that can be displayed on your Switch 7700.
debugging Syntax
debugging { all | module-name [ debugging-option ] }
undo debugging { all | module-name [ debugging-option ] }
View
User view
Parameter
all: Enable or disable all the debugging.
module-name: Specify the module name.
debugging-option: Debugging option.
Description
Using the debugging command, you can enable the system debugging. Using the
undo debugging command, you can disable the system debugging.
By default, all the debugging processes are disabled.
Ethernet Switch provides various kinds of debugging functions for technical
support personnel and experienced maintenance staff to troubleshoot the
network.