Switch 7700 Command reference Guide, v2.0

456 CHAPTER 11: USING SYSTEM MANAGEMENT COMMANDS
16 * * *
17 * * *
18 ALLSPICE.LCS.MIT.EDU (18.26.0.115) 339 ms 279 ms 279 ms
Log Commands This section displays the logging options available on your Switch 7700.
display channel Syntax
display channel [ channel-number | channel-name ]
View
All views
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, the system has
ten channels.
channel-name: Specify the channel name.
Description
Using the display channel command, you can display the details about the
information channel.
Without a parameter, the display channel command shows the configurations
of all the channels.
Example
Show details about the information channel 0.
<SW7700>display channel 0
channel number:0, channel name:console
MODU_ID NAME ENABLE LOG LEVEL ENABLE TRAP LEVEL ENABLEDEBUGGING
LEVEL
ffff0000all Y warning Y debugging Y debugging
display info-center Syntax
display info-center [ { buffered | history } [ sizeval ] ]
View
All views
Parameter
sizeval: Configure how many pieces of information will be displayed.
buffered: Log buffer
history: Trap buffer
Description
Using the display info-center command, you can display the configuration of
system log and the information recorded in the memory buffer.