Switch 7700 Command reference Guide, v2.0

458 CHAPTER 11: USING SYSTEM MANAGEMENT COMMANDS
Example
Configure to output log information to the console through channel 0.
[SW7700]info-center console channel 0
info-center enable Syntax
info-center enable
undo info-center enable
View
System view
Parameter
None
Description
Using the info-center enable command, you can enable the system log
function. Using the
undo info-center enable command, you can disable system
log function.
By default, system log function is enabled.
Only after the system log function is enabled can the system output the log
information to the info-center loghost and console, etc.
For the related commands, see info-center loghost, info-center logbuffer,
info-center console channel, info-center monitor channel, display
info-center
.
Example
Enable the system log function.
[SW7700]info-center enable
info-center logbuffer Syntax
info-center logbuffer [ max-size buffersize ] [ channel {
channel-number | channel-name } ]
undo info-center logbuffer [ channel | max-size ]
View
System view
Parameter
size: Configure the size of buffer.
buffersize: Size of buffer (number of messages which can be kept); The default
size of the buffer is 20.
channel: Configure the channel to output information to buffer.