Switch 7700 Command reference Guide, v2.0

Log Commands 459
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specify the channel name.
Description
Using the info-center logbuffer command, you can configure to output
information to the memory buffer. Using the
undo info-center logbuffer
command, you can cancel the information output to buffer
This command takes effect only after the system logging is enabled.
For the related commands, see info-center enable, display info-center.
Example
Send log information to buffer and sets the size of buffer as 50.
[SW7700]info-center logbuffer 50
info-center loghost Syntax
info-center loghost host-ip-addr [ channel { channel-number |
channel-name } ] [ facility local-number ] [ language { chinese |
english } ]
undo info-center loghost host-ip-addr
View
System view
Parameter
host-ip-addr: IP address of info-center loghost.
channel: Configure information channel of the info-center loghost.
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specify the channel name.
facility: Configure the recording tool of info-center loghost.
local-number: Record tool of info-center loghost, ranging from local0 to local7.
language: Set the logging language.
chinese, english: Language used in log file.
Description
Using the info-center loghost command, you can set the IP address of the
info-center loghost to send information to it. Using the
undo info-center
loghost
command, you can cancel output to info-center loghost.
By default, Ethernet switches do not output information to info-center loghost.