Switch 7700 Command reference Guide, v2.0

Log Commands 461
Related commands: display snmp.
Example
Configure channel 6 as the SNMP information channel.
[SW7700]info-center snmp channel 6
info-center source Syntax
info-center source { modu-name | default } channel { channel-number |
channel-name } [ { log | trap | debug } * { level severity | state
state ] } *
undo info-center source { modu-name | default } channel {
channel-number | channel-name }
View
System view
Parameter
modu-name: Module name.
default: All the modules.
log: Log information.
trap: Trap information.
debugging: Debugging information.
level: Level.
severity: Information level, do not output information below this level.
Information at different levels is as follows:
emergencies: Level 0 information, which cannot be used by the system.
alerts: Level 1 information, to be reacted immediately.
critical: Level 2 information, critical information.
errors: Level 3 information, error information.
warnings: level 4 information, warning information.
notifications: Level 5 information, showed normally and important.
informational: Level 6 information, notice to be recorded.
debugging: Level 7 information, generated during the debugging progress.
channel-number: Channel number to be set.
channel-name: Channel name to be set.
state: Set the state of the information.