Switch 7700 Command reference Guide, v2.0

466 CHAPTER 11: USING SYSTEM MANAGEMENT COMMANDS
Example
Enable the terminal display debugging.
<SW7700>terminal debugging
terminal logging Syntax
terminal logging
undo terminal logging
View
User view
Parameter
None
Description
Using the terminal logging command, you can start terminal log information
display. Using the
undo terminal logging command, you can disable terminal
log information display.
By default, this function is enabled.
Example
Disable the terminal log display.
<SW7700>undo terminal logging
terminal monitor Syntax
terminal monitor
undo terminal monitor
View
User view
Parameter
None
Description
Using the terminal monitor command, you can enable the log
debugging/log/trap on the terminal monitor. Using the
undo terminal monitor
command, you can disable these functions.
By default, enable these functions for the console user and disable them for the
terminal user.
This command only takes effect on the current terminal where the commands are
input. The debugging/log/trap information can be output to the current terminal,
beginning in user view. When the terminal monitor is shut down, no
debugging/log/trap information will be displayed in local terminal, which is equals
to having performed the
undo terminal debugging, undo terminal logging,